Skip to content
Diode

1N5819 Diode

৳16

The 1N5819 Diode is a 1 amp, 40 V Schottky rectifier whose low forward drop, roughly 0.45-0.6 V, wastes less power as heat than a standard diode in the same spot.

Typical spots: in series with a battery or solar panel lead so a swapped connection or a dark panel cannot discharge the pack, on the output of DC-DC converter modules, and anywhere a 5 V or 12 V rail cannot afford the higher drop of a 1N4007. It also has no reverse recovery to speak of, so it keeps pace with switching-regulator frequencies.

  • 1 A average forward current, 40 V reverse rating
  • Forward drop about 0.45-0.6 V, runs cooler at the same load
  • Reverse leakage is higher than silicon diodes and rises with temperature; normal for Schottky
  • DO-41 body, mechanical drop-in for a 1N4007 footprint

Above an amp, the 3 A 1N5822 is the same idea in a bigger body.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Device: 1N5819 Schottky barrier rectifier diode

Configuration: single axial diode

Average Forward Current: 1 A

Repetitive Reverse Voltage (VRRM): 40 V

Forward Voltage (VF): approx. 0.6 V max at 1 A (0.45 V class at lighter load)

Reverse Leakage: higher than silicon diodes, rises with temperature

Switching: essentially no reverse recovery, very fast

Peak Surge Current: approx. 25 A

Package: DO-41 axial, cathode marked with band

Typical Uses: reverse polarity protection, solar blocking, DC-DC output rectification, battery circuits

CategoryDiode
Model no.1N5819
AvailabilityIn stock
In stock19 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 1N5819 Diode

Why choose a 1N5819 Schottky instead of a 1N4007?
It drops only about half a volt instead of one volt, so at 1 A it wastes half the power as heat, and it switches far faster - ideal for battery circuits, solar blocking and switching regulators.
What is the maximum voltage it can block?
40 V reverse, which comfortably covers 5 V, 9 V and 12 V systems; for mains rectification or high-voltage rails you need a different diode, since exceeding 40 V destroys the Schottky junction.
How do I use it for reverse polarity protection?
Put it in series with your supply input, banded end toward the circuit, so a reversed battery is simply blocked; the half-volt loss is the small price compared to a fried board.
Can it rectify at high frequency in a DC-DC converter?
Yes - Schottky diodes have virtually no reverse recovery, which is why converters running at tens or hundreds of kilohertz specify Schottky output diodes like the 1N5819.
Why does it get warm even though the drop is small?
At full 1 A it still dissipates roughly half a watt, and its reverse leakage grows with heat, so keep the leads airy or tie it to metal when running continuously near its rating.
Can I use two in parallel for more current?
Not reliably - the diode with the slightly lower forward voltage takes most of the current; for loads above 1 A use a 3 A Schottky like the 1N5822 instead.
Will it work as a flyback diode on a relay?
Yes for small 5 V and 12 V relay coils, and its fast action clips the spike cleanly; just confirm the coil current stays near or below 1 A.
1N5819 স্কটকি ডায়োডের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন, Tekko-তে সেরা দামে পেজের আপডেটেড প্রাইস অনুযায়ী অর্ডার করুন।
অনলাইনে এটা কোথায় পাবো বা কিনবো?
Tekko অনলাইন স্টোরে স্টকে আছে - সারা বাংলাদেশে হোম ডেলিভারিতে বাসায় পৌঁছে যাবে।
ব্যাটারি চালিত প্রজেক্টে এটা কী কাজে লাগে?
সাধারণ ডায়োডের চেয়ে অর্ধেক ভোল্টেজ ড্রপ হওয়ায় ব্যাটারির শক্তি কম নষ্ট হয়, সার্কিট কম গরম হয়, আর উল্টো পোলারিটিতে পুরো বোর্ড বেঁচে যায়।
সার্কিটে কিভাবে লাগাবো?
সাপ্লাইয়ের সাথে সিরিজে লাগান, দাগের দিক (ক্যাথোড) সার্কিটের দিকে রেখে - তাহলে কারেন্ট শুধু সঠিক দিকেই যাবে আর ব্যাটারি উল্টো লাগালে কিছুই পুড়বে না।
সোলার প্যানেলের সাথে ব্যবহার করা যাবে কি?
যাবে - 12V ব্যাটারির চেয়ে বড় সিস্টেমে ব্লকিং ডায়োড হিসেবে দারুণ কাজ করে, তবে 24V বা তার চেয়ে উঁচু সিস্টেমে 40V রেটিং মাথায় রেখে দুটো সিরিজে লাগাতে হবে।