Skip to content
Diode

1N5408 Diode

৳15

The 1N5408 Diode is the 3 amp rectifier of the classic 1N400x family, blocking 1000 V in reverse in a sturdy DO-201AD axial body.

It takes over where a 1N4007 runs out of current: bridge rectifiers in linear supplies, battery charger outputs, reverse-polarity protection on battery leads and flyback across bigger inductive loads. Same banded-cathode convention, so wiring habits carry straight over.

  • 3 A average forward current, 1000 V reverse voltage
  • Forward drop around 1.0-1.2 V at the full 3 A
  • Tolerates roughly 200 A non-repetitive surge while filter capacitors charge
  • For more than 3 A, the 6A10 (6 A) is the next size up

Add it to the cart with the rest of the order; delivery runs across Bangladesh on cash on delivery.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Diode Type: General purpose silicon rectifier

Reverse Voltage (VRRM): 1000 V

Average Forward Current: 3 A

Non-repetitive Surge Current (IFSM): approx. 200 A

Forward Voltage: approx. 1.0-1.2 V at rated 3 A

Reverse Leakage: under approx. 10 µA at rated voltage

Package: DO-201AD axial through-hole

Polarity: banded end is the cathode

Operating Temperature: approx. -65 to +175 °C junction

Typical Uses: bridge rectifiers, power supplies, chargers, polarity and flyback protection

Lead Length: approx. 28 mm body-to-body standard axial form

Weight: approx. 1.5 g

CategoryDiode
Model no.1N5408
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 1N5408 Diode

What is the 1N5408 diode used for?
It rectifies AC to DC and protects circuits - typical jobs are bridge rectifier arms, power supply outputs up to 3 A, reverse-polarity guards and flyback snubbers.
How is it different from the 1N4007?
Same 1000 V blocking voltage, but the 1N5408 carries 3 A instead of 1 A and comes in the thicker DO-201AD body, so it runs cooler at higher current.
Which end is the cathode?
The end marked with the painted band is the cathode; current flows from the unbanded anode side toward the band.
Can I put it across a motor or relay coil?
Yes - wired reverse-biased across an inductive load it clamps the switching spike and protects your transistor or driver.
Does it need a heat sink?
Usually not - at 3 A it drops roughly 1 V, so dissipating about 3 W is best handled by trimming the leads long or bolting the body to metal for big continuous loads.
Can four of them make a bridge rectifier?
Yes, four 1N5408 diodes in the classic bridge arrangement rectify a transformer secondary into positive and negative DC rails for up to 3 A output.
What happens if I exceed 3 A?
The junction overheats - brief surges up to about 200 A are survivable, but continuous current above the rating will burn the diode open or short.
1N5408 ডায়োডের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন, ওখানেই আপডেটেড প্রাইস দেওয়া থাকে।
অনলাইনে কোথায় কিনবো?
Tekko অনলাইন স্টোরে এটি স্টকে আছে - সারা বাংলাদেশে হোম ডেলিভারি সুবিধা সহ অর্ডার করতে পারবেন।
পাওয়ার সাপ্লাইয়ে এটার কী কাজে লাগে?
AC-কে DC-তে রূপান্তর করতে ব্রিজ রেক্টিফায়ারের আর্মে লাগে, আর ব্যাটারি চার্জার বা 3A পর্যন্ত সাপ্লাইয়ে রিভার্স-পোলারিটি প্রোটেকশন দিতেও কাজে লাগে।
সার্কিটে কিভাবে লাগাবো?
কারেন্ট যেদিকে যাবে সেদিকে ব্যান্ডহীন পাশ (অ্যানোড) রাখুন আর ব্যান্ডের পাশ (ক্যাথোড) আউটপুট/পজিটিভ দিকে - ফ্লাইব্যাকে লোডের উল্টো দিকে লাগাবেন।
1N4007-এর বদলে কি এটা ব্যবহার করা যায়?
হ্যাঁ, সবসময়ই যাবে - ভোল্টেজ রেটিং একই 1000V, শুধু কারেন্ট ক্ষমতা 3 গুণ বেশি, তাই বেশি কারেন্টের কাজে এটাই নিরাপদ।