Skip to content
Diode

6A10 Rectifier Diode

৳20

The 6A10 Rectifier Diode is a 6 amp, 1000 V rectifier in a large R-6 axial body, for supplies that push more current than a 1N5408 can handle.

Four of them make a heavy-duty bridge for a battery charger or transformer supply, a pair works as solar blocking on bigger panels, and repair benches use them on inverter, UPS and charger boards where the original rectifier has failed short.

  • 6 A average forward current, 1000 V reverse voltage
  • Forward drop about 1.1 V max at 6 A, real heat at full load; short leads and heatsinking help
  • Absorbs roughly 150 A non-repetitive surge at power-up
  • Standard recovery, meant for 50 Hz and low-frequency rectification

Banded end is the cathode, the same convention as the smaller 1N-series rectifiers.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Device: 6A10 high-current rectifier diode

Configuration: single axial diode

Average Forward Current: 6 A

Repetitive Reverse Voltage (VRRM): 1000 V

Forward Voltage (VF): approx. 1.1 V max at 6 A

Non-repetitive Surge Current: approx. 150 A

Recovery Type: standard recovery, for 50 Hz and low-frequency use

Package: R-6 axial, cathode marked with band

Lead Diameter: approx. 1.5 mm

Power Dissipation: approx. 6.6 W at full rated current, heatsinking advised

Typical Uses: bridge rectifiers, solar blocking diode, chargers, inverter and UPS repairs

CategoryDiode
Model no.6A10
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 6A10 Rectifier Diode

What is a 6A10 diode used for?
It rectifies or blocks current in circuits up to 6 A at 1000 V, which covers battery chargers, inverter and UPS boards, linear power supplies and blocking diodes on solar panel outputs.
How much current can it take continuously?
6 A average is the datasheet rating, but at full load it dissipates several watts of heat, so give the leads airflow or mount it against metal to keep the junction cool for long-term reliability.
Can I use it as a solar blocking diode?
Yes - wire it in series with the panel output, banded end toward the battery, so panels cannot discharge the battery back through themselves at night; 6 A covers most 100 W-class 12 V panels.
What is the difference between 6A10, 1N5408 and 1N4007?
They share the same 1000 V rating but differ in current: 1 A for the 1N4007, 3 A for the 1N5408 and 6 A for the 6A10 - pick the one above your circuit current with comfortable margin.
How do I build a 6 A bridge rectifier with it?
Connect four 6A10 diodes in the standard diamond bridge, feed the AC into the two corner junctions and take DC from the banded pair (positive) and unbanded pair (negative); mount them spaced out for cooling.
Is it suitable for switch-mode power supply repairs?
For the 50 Hz input side yes, but the high-frequency switching stage needs fast-recovery or Schottky parts; substituting a 6A10 there causes overheating and failed repairs.
Does polarity matter when I solder it in?
Absolutely - the band is the cathode and reversing it shorts the AC winding or blocks your supply entirely, so check the band against the board marking before every solder joint.
6A10 রেক্টিফায়ার ডায়োডের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন - Tekko-তে সেরা দামে পেজের আপডেটেড প্রাইস অনুযায়ী অর্ডার করতে পারবেন।
অনলাইনে এই ডায়োড কোথায় পাবো বা কিনবো?
Tekko অনলাইন স্টোরে স্টকে আছে - অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারিতে বাসায় পৌঁছে যাবে।
ইনভার্টার-চার্জার মেরামতে এটা কী কাজে লাগে?
UPS, ইনভার্টার আর ব্যাটারি চার্জার বোর্ডে বার্ন হয়ে যাওয়া 6 অ্যাম্পিয়ার ক্লাসের রেক্টিফায়ারের সবচেয়ে সহজ রিপ্লেসমেন্ট এটা।
হাই-কারেন্ট সার্কিটে কিভাবে লাগাবো?
দাগের দিক (ক্যাথোড) DC পজিটিভের দিকে রেখে মোটা লিড দিয়ে সোল্ডার করুন, আর ফুল লোডে চললে লিডে বাতাস চলাচল বা মেটালের সাথে ঠান্ডা করার ব্যবস্থা রাখুন।
সোলার প্যানেলের সাথে ব্যবহার করা যাবে কি?
যাবে - প্যানেল আউটপুটে সিরিজে দাগ ব্যাটারির দিকে রেখে লাগালে রাতে ব্যাটারি থেকে প্যানেলে কারেন্ট ফিরে যাওয়া বন্ধ হয়, 100 ওয়াট ক্লাসের প্যানেলে দারুণ কাজ করে।