
Diode
BC547 NPN Transistor
৳5
- Fresh, latest-batch stock — never old shelf stock
- Tested before it ships
- Arrives dead? We replace it
- Same-day delivery in Dhaka · Cash on Delivery nationwide
- See it before you buy: visit our shop at Ansar Ali Sarak, Boat Ghat, East Nurer Chala, Vatara
The BC547 NPN Transistor is the small-signal workhorse of hobby electronics: a TO-92 part that amplifies weak signals and switches loads up to 100 mA from a pin's worth of base current.
An Arduino or ESP32 pin drives it through a 1k-10k resistor to run LEDs, buzzers and small 5 V relays; it also builds preamps, oscillators and Schmitt triggers, and pairs with the BC557 PNP for push-pull stages. Flat face toward you, legs down, the pins read C-B-E.
- 45 V collector-emitter, 100 mA collector current, 500 mW
- Gain grades A/B/C give hFE from 110 up to 800
- Useful gain up to roughly 300 MHz
- Pairs with the BC557 PNP complement
Add a flyback diode across relay and motor coils; a bare transistor will not forgive inductive kickback.
Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.
| Category | Diode |
| Model no. | BC547 |
| Availability | In stock |
| In stock | 20 pcs |
| Delivery | Cash on Delivery, nationwide Bangladesh |
| Transistor Type | NPN small-signal BJT |
| Package | TO-92, pinout C-B-E on the flat face |
| Collector-Emitter Voltage (VCEO) | 45 V |
| Collector-Base Voltage (VCBO) | 50 V |
| Emitter-Base Voltage (VEBO) | 6 V |
| Collector Current (IC) | 100 mA max |
| DC Current Gain (hFE) | 110-800 depending on A/B/C grade |
| Transition Frequency | up to approx. 300 MHz |
| Power Dissipation | 500 mW at 25 °C |
| Complement | BC557 (PNP) |
| Base Drive | 1k-10k resistor from a 5 V logic pin for switching |
| Weight | approx. 1 g |
Customer reviews
No reviews yet — be the first.
Questions about the BC547 NPN Transistor
What is the BC547 transistor used for?
Amplifying small signals and switching loads up to 100 mA: LED drivers, relay drivers, preamps, oscillators and logic level shifting. It is the default general-purpose NPN on a hobby bench.
How do I identify its legs?
Hold the flat face toward you with the legs down: the pins are Collector, Base, Emitter from left to right on the standard BC547 pinout.
How do I switch a load with an Arduino pin?
Connect the load between VCC and the collector, emitter to GND, and drive the base through a 1k-10k resistor from the digital pin. Add a flyback diode when the load is a relay or motor.
Can it drive a relay directly?
Yes for small 5 V relays whose coil draws under about 100 mA, with a flyback diode across the coil and a suitable base resistor. Heavier coils need a bigger transistor or a driver stage.
What is the difference between BC547A, B and C?
They are gain grades of the same transistor: hFE 110-220 for A, 200-450 for B and 420-800 for C, with identical voltage and current limits. Any grade works in most hobby circuits.
BC547 ট্রানজিস্টরের দাম কত?
এই পেজের ওপরেই বর্তমান দাম দেখানো থাকে; Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিন, আজকের রেট জানিয়ে দেওয়া হবে।


