Skip to content
Modules

20 Kohm 1/4w Film Resistor

৳200

The 20 Kohm 1/4W film resistor is a workhorse passive that belongs in every parts drawer, whether you are scaling a sensor voltage, biasing a transistor stage or trimming gain around an op-amp. Pair it with an LDR in a classic divider and an Arduino pin can tell dusk from daylight, letting you build automatic night lamps and light meters in minutes. At 0.25 watt with a ±5% band it shrugs off continuous duty on 5V and 3.3V rails, and the 20 Kohm film resistor price in Bangladesh keeps it practical to stock by the hundred for school labs. Axial through-hole leads push straight into breadboards, veroboards and PCB pads with no special tools. Buy 20 Kohm 1/4w Film Resistor in Bangladesh from Tekko and keep this versatile value ready for your next divider or bias network.

Key Features:
• Resistance 20 kΩ (20,000 ohm) held within a ±5% tolerance band
• Power rating 0.25 W (1/4 W) with generous margin on logic-level circuits
• Colour code Red-Black-Orange-Gold reads instantly at the bench
• Axial through-hole leads suit breadboard, perfboard and automated PCB assembly
• Film element delivers stable, low-noise behaviour in analog dividers
• Well suited to LDR light sensors, ADC input scaling and transistor biasing
• Sold per piece, so order the exact count your project or kit needs

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

CategoryModules
Model no.RES-20K-025W
AvailabilityIn stock
In stock100 pcs
DeliveryCash on Delivery, nationwide Bangladesh
Resistance20 kΩ (20,000 Ω)
Tolerance±5%
Power Rating0.25 W (1/4 W) at 70°C ambient, derate above
TypeFilm resistor with insulated epoxy coating
PackageAxial Through-Hole
Body Sizeapprox. 2.5 mm diameter × 6.5 mm length
Lead Diameterapprox. 0.5 mm, pre-tinned for easy soldering
Colour CodeRed - Black - Orange - Gold
Operating Temperature-55°C to +155°C
Temperature Coefficientapprox. ±250 ppm/°C
Max Overload Voltageapprox. 250 V (power limited)
Quantity1 piece per unit ordered (order multiple units for packs)

Questions about the 20 Kohm 1/4w Film Resistor

What is a 20 kohm resistor used for?
It shines in voltage dividers with LDR or thermistor sensors, in ADC input scaling, transistor biasing and gain-setting networks around op-amps.
How do I make a light sensor with it?
Wire the 20K resistor in series with the LDR between 5V and GND, feed the midpoint to an analog pin, and the reading moves with the light level.
What voltage and current can it take?
At 0.25 W it dissipates safely up to about 70 V across itself in continuous use, far beyond anything a 3.3V or 5V logic circuit will demand.
Does it fit breadboards and PCBs alike?
Yes, the 0.5 mm axial leads seat directly in breadboard holes, perfboard pads and standard PCB footprints without any lead forming.
Will it work with Arduino, ESP32 and similar boards?
Certainly — any GPIO or ADC input accepts a 20K divider, and the tiny currents involved are safe on Arduino, ESP32, STM32 and Raspberry Pi.
How precise is the ±5% tolerance in practice?
Every piece measures between 19K and 21K, which is more than accurate enough for dividers and biasing; pick 1% metal film only for measurement-grade circuits.
20 kohm রেজিস্টরের দাম কত?
বর্তমান দাম Tekko প্রোডাক্ট পেজে দেখুন, অর্ডারের আগে পেজের প্রাইস মিলিয়ে নিন।
অনলাইনে এই রেজিস্টরটা কোথায় পাবো?
Tekko থেকে অর্ডার করুন — সারা বাংলাদেশে হোম ডেলিভারি করা হয়।
LDR দিয়ে লাইট সেন্সর বানাতে এই ভ্যালু কী কাজে লাগে?
LDR-এর সাথে সিরিজ ডিভাইডারে 20K বসালে আলো-অন্ধকারে আউটপুট ভোল্টেজ বদলায়, ফলে অটো নাইট ল্যাম্প বা লাইট মিটার সহজেই বানানো যায়।
সার্কিটে কিভাবে লাগাবো?
এক প্রান্ত সাপ্লাই বা গ্রাউন্ডে, অন্য প্রান্ত সেন্সর বা পিনে দিন — রেজিস্টরে পোলারিটি নেই, যেদিকেই লাগান কাজ করবে।
নতুন যারা শিখছে, তাদের জন্য ঠিক আছে?
একদম ঠিক — রেজিস্টরই ইলেকট্রনিক্সের সবচেয়ে সহজ কম্পোনেন্ট, কালার কোড পড়তে পারলেই যে কেউ লাগিয়ে ফেলবে।
কোয়ালিটি ও স্থায়িত্ব কেমন?
ভালো গ্রেডের ফিল্ম এলিমেন্ট ব্যবহার হয় এবং পাঠানোর আগে ভ্যালু যাচাই করা হয়, তাই বছরের পর বছর নির্ভরযোগ্যভাবে চলে।