Skip to content
Modules

4x4 Keypad - 16 Key - Matrix Membrane Type

৳80

The 4x4 keypad, 16 key matrix membrane type, is a thin self-adhesive pad with sixteen keys in a 4 row by 4 column matrix: digits 0 to 9, A to D, and the * and # keys. There is no driver IC and nothing to power; each press shorts one row line to one column line, so an Arduino or ESP32 scans eight lines and knows which key was pressed. The 8-way ribbon ends in a female header that plugs straight onto male pins, and the adhesive backing sticks the pad flush onto a panel like a fitted keyboard.

  • 16 keys: 0-9, A, B, C, D, * and #
  • Passive membrane matrix, 8 digital pins to scan (2 with an I2C expander)
  • Self-adhesive backing, approx 70 x 77 mm, under 1 mm thin
  • Rated approx 5 million presses per key

The classic projects are password door locks, calculators and LCD menus, and the Arduino Keypad library handles the scanning for you. Debounce in software, around 5 ms, or accept the odd double register.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Layout: 4 rows x 4 columns, 16 keys total

Key Legend: digits 0-9 plus A, B, C, D, * and #

Switch Type: membrane carbon-contact matrix, no driver IC

Connection: 8-pin ribbon cable with female header (4 rows + 4 columns)

Interface: passive matrix scanning, needs 8 digital pins (2 pins with an I2C expander)

Max Voltage: 24 V DC

Max Current: 30 mA

Contact Resistance: approx 100-200 ohm typical for membrane keys

Contact Bounce: approx 5 ms — debounce in software or use a keypad library

Operating Force: light tactile press, approx 160 g

Key Life: approx 5 million actuations per key

Backing: self-adhesive sticker on the rear face

Dimensions: approx 70 x 77 x 1 mm

Weight: approx 10 g

CategoryModules
Model no.KEYPAD-4X4
AvailabilityIn stock
In stock3 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 4x4 Keypad - 16 Key - Matrix Membrane Type

What is a 4x4 matrix keypad used for?
It gives your project a 16-button human input panel — PIN and password entry for door locks, menu selection on an LCD, calculator keypads, code entry boxes and simple game controllers.
How do I wire it to an Arduino?
Plug the 8-pin ribbon onto 8 digital pins (for example rows on D2-D5 and columns on D6-D9), then tell the Keypad library which pins are rows and which are columns — no resistors or extra parts required.
What does the Arduino code look like?
Install the Mark Stanley Keypad library, define a char keys[4][4] map with 123A456B789C*0#D, pass the row and column pin arrays to Keypad makeKeymap, and call keypad.getKey() in a loop to get each pressed character.
Does it need pull-up or pull-down resistors?
No — the library enables the internal pull-ups on the column pins and drives the rows one at a time, so the bare keypad is all you need.
Will it work with ESP32, ESP8266 or Raspberry Pi?
Yes — it is a passive switch matrix, so any 3.3V or 5V microcontroller can scan it. A PCF8574 I2C backpack cuts the pin count down to just SDA and SCL if you are short on GPIO.
How do I mount it on my project box?
Peel the adhesive backing and press the pad onto a clean flat panel, then route the ribbon inside; the 1 mm thickness lets it sit almost flush, or you can screw it down through the corner areas.
What are its limits compared to mechanical keypads?
There is no loud click for feedback (add a buzzer for confirmation), the flat membrane is not weatherproof for outdoor rain, and contact bounce means a few milliseconds of debouncing belongs in your code.
৪x৪ কিপ্যাডের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন, ওখানেই আপডেটেড প্রাইস দেওয়া থাকে।
এই কিপ্যাড অনলাইনে কোথায় কিনবো?
Tekko অনলাইন স্টোরে 4x4 membrane keypad স্টকে আছে, সারা বাংলাদেশে হোম ডেলিভারি সুবিধা নিয়ে অর্ডার করতে পারবেন।
পাসওয়ার্ড লক প্রজেক্টে এটা কী কাজে লাগে?
ব্যবহারকারী এই কিপ্যাডে পিন কোড টাইপ করবে, Arduino মিলিয়ে দেখবে আর সঠিক হলে রিলে বা সলিনয়েড লক খুলে দেবে — ডিজিটাল কোড লক, সেফ বা অ্যাটেনডেন্স বক্স বানাতে এটাই মূল ইনপুট যন্ত্র।
Arduino-র সাথে কিপ্যাড কিভাবে লাগাবো?
৮ পিনের রিবনটা ডিজিটাল পিনে লাগান (সারি ৪টা এক পাশে, কলাম ৪টা অন্য পাশে), Keypad লাইব্রেরি ইনস্টল করে রো-কলাম পিন কোডে বসিয়ে দিন, তারপর getKey() দিয়ে চাপা কী পড়ে নিন — বাইরের কোনো রেজিস্টর লাগে না।
একদম নতুনরা কি এটা ব্যবহার করতে পারবে?
অবশ্যই — লাইব্রেরি দিয়ে ৫ লাইনের কোডেই কী পড়া যায়, আর ভুল লাগালে কিছুই নষ্ট হয় না কারণ এটা একেবারেই প্যাসিভ পার্টস, তাই প্রথম প্রজেক্টের জন্য নিরাপদ ইনপুট ডিভাইস।