Skip to content
Tools & Accessories

Rocker Switch ON/OFF KCD1-101 2pin

৳20

KCD1-101 ON/OFF rocker switch with two terminals and the I and O positions marked on the rocker itself. The rectangular body snaps straight into a panel cut-out of roughly 12 x 19 mm, no screws or brackets needed, and the two solder lugs keep the wiring to two points.

Rated around 6 A at 250 VAC and 10 A at 125 VAC, it covers power switching for lamps, appliances and DIY power supplies as long as the load stays inside those limits. On mains circuits, switch the live wire.

  1. Model KCD1-101, SPST ON/OFF, 2 terminals
  2. Snap-in panel mount, approx. 12 x 19 mm cut-out
  3. Typical rating approx. 6 A at 250 VAC / 10 A at 125 VAC

Cut a test hole in scrap material first; a loose fit lets the switch rock in the panel instead of seating firmly.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Model: KCD1-101

Type: Rocker switch, ON/OFF (SPST)

Pins: 2 terminals

Marking: I (ON) / O (OFF) positions

Rating: Typical approx 6 A at 250 VAC / 10 A at 125 VAC

Mounting: Snap-in rectangular panel mount

Panel Cut-Out: approx 12 x 19 mm (typical, measure before cutting)

Terminals: Solder lugs for wire connection

Body: Plastic housing with rocker button (typical)

Applications: Power switching for DIY projects, appliances, lamps and control panels

Installation Note: Switch the live wire on mains circuits and stay within the rated current

CategoryTools & Accessories
Model no.KCD1-101
AvailabilityIn stock
In stock25 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the Rocker Switch ON/OFF KCD1-101 2pin

What is a KCD1-101 rocker switch used for?

It is an ON/OFF power switch that presses into a rectangular panel hole, used on power supplies, lamps, robots and appliances.

How do I wire a 2-pin rocker switch?

Place it in series with the wire feeding your load: one terminal to the supply side and the other to the device. On mains projects, break the live wire and keep the switch body insulated.

Is it compatible with 220V mains in Bangladesh?

Yes, the typical rating of about 6 A at 250 VAC covers ordinary 220V mains use as long as the load current stays within that limit.

How much current can it safely switch?

Treat approximately 6 A at 250 VAC and 10 A at 125 VAC as the typical limits, and fit a fuse rated below the switch so the fuse blows first on any fault.

Any tips before I cut the panel hole?

Measure the switch body and cut a test hole in scrap material first, because a loose fit lets the switch rock in the panel instead of snapping in firmly.

এই রকার সুইচের দাম কত?

বর্তমান দাম এই পেজের ওপরেই দেখা যায়; Contact for price লেখা থাকলে WhatsApp-এ মেসেজ দিলে আজকের দাম জানিয়ে দেওয়া হবে।