Skip to content
Tools & Accessories

SPDT Slide Switch 2.54mm Spacing

৳15

SPDT slide switch in the SS-12D00 style, three legs on a 2.54 mm pitch so it sits straight into a breadboard or solders onto perfboard. The common pin connects to one of the two outer pins depending on slider position, which covers plain on/off duty and picking between two signals with the same part.

It is the usual power switch on battery-powered Arduino and ESP32 builds, and the common replacement for a worn-out slider in toys, torches and small appliances.

  1. SPDT, 2 positions, no centre off
  2. 3 pins at 2.54 mm, breadboard friendly
  3. Rating approx. 0.3 A at 30V DC, for signals and small loads
  4. Body approx. 19 x 9 x 8 mm

Feed battery positive into the middle pin, take the circuit supply from either outer pin and leave the unused one open.

Not sure it will work? Test your circuit free in Tekko Sim — on your phone, in Bangla or English.

Switch Type: SPDT slide (SS-12D00 style)

Positions: 2 (ON-ON), no centre off

Pins: 3 terminals on a 2.54mm pitch

Contact Configuration: 1 common, 2 selectable throws

Rating: approx 0.3A at 30V DC

Contact Resistance: below 30 milliohm when new

Insulation Resistance: 100M ohm minimum at 250V DC

Actuation Force: light thumb push, approx 200-300gf

Operating Life: approx 10,000+ cycles

Body Size: approx 19 x 9 x 8mm

Mounting: through-hole, PCB or breadboard

Operating Temperature: -20°C to +70°C

CategoryTools & Accessories
Model no.SW-SPDT-254
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the SPDT Slide Switch 2.54mm Spacing

What is an SPDT slide switch used for?

Its common pin connects to one of two output pins depending on slider position, which suits a battery on/off cut-off, mode selection, or toggling a circuit between two paths.

Does it plug into a breadboard without soldering?

Yes, the 2.54mm legs seat in breadboard holes directly, which is convenient for proving a circuit before committing it to a soldered board.

Can it switch a motor or high-current LED strip?

No, at 0.3A it is meant for signals and small loads. Route motor current through a transistor, relay or MOSFET and let this switch only command the driver.

SPDT versus SPST, which do I need?

An SPST breaks one path with two pins, while this three-pin SPDT part can alternate a common between two destinations or simply use one throw for on/off duty.

The switch feels loose or does not click, what happened?

Excessive force on the actuator or soldering heat held too long softens the internal mechanism. Replacement is the practical fix, and gentle thumb pressure keeps a new one healthy.

SPDT Slide Switch 2.54mm Spacing এর দাম কত?

বর্তমান দাম এই পেজের ওপরেই দেখা যায়; Contact for price থাকলে WhatsApp-এ মেসেজ দিলে আজকের দাম জানানো হবে।