Tekko BDSimSimulatorProjects

ESP32 মোশন অ্যালার্ট — PIR দেখলে ক্লাউডে খবর, বাসায় বাজারESP32 Motion Alert

PIR এর OUT পিন ESP32 কে জাগায়, ESP32 ক্লাউডে খবর পাঠায় আর বাসায় বাজনা বাজে — জিএসএম অ্যালার্মের মতোই, শুধু সিম ছাড়াই।

The PIR OUT pin wakes the ESP32, which pings a cloud URL with the event and sounds the local buzzer — the same someone-is-in-the-shop pattern as a GSM alarm, minus the SIM.

▶ ফ্রি চালিয়ে দেখো / Run it free Parts অর্ডার করো (WhatsApp)

সার্কিট ডায়াগ্রাম · Circuit diagram

ESP32 Motion Alert circuit diagram — ESP32 DevKit V1 (WROOM-32), PIR motion sensor (HC-SR501), Buzzer (5 V), Resistor 220Ω, LED (red), Jumper wires

যা যা লাগবে · Parts you need

তার লাগানো · Wiring

PIR motion sensor (HC-SR501) VCC→ESP32 DevKit V1 (WROOM-32) VIN
PIR motion sensor (HC-SR501) GND→ESP32 DevKit V1 (WROOM-32) GND
PIR motion sensor (HC-SR501) OUT→ESP32 DevKit V1 (WROOM-32) D4
Buzzer (5 V) +→ESP32 DevKit V1 (WROOM-32) D15
Buzzer (5 V) -→ESP32 DevKit V1 (WROOM-32) GND.2
ESP32 DevKit V1 (WROOM-32) D27→Resistor a
Resistor b→LED A
LED K→ESP32 DevKit V1 (WROOM-32) GND.2

Code (Arduino C++)

#include <WiFi.h>
#include <HTTPClient.h>
// ESP32 motion alert: the PIR's OUT pin wakes the ESP32, which pings a cloud
// URL with the event and sounds the local buzzer — the same "someone is in
// the shop after midnight" pattern as a real GSM/WiFi alarm, minus the SIM.
// Wi-Fi credentials stay in the sketch for the demo; in production read them
// from preferences so they never sit in a git repository.
void setup() {
  Serial.begin(115200);
  pinMode(4, INPUT);
  pinMode(15, OUTPUT); pinMode(27, OUTPUT);
  WiFi.begin("Tekko-WiFi", "12345678");
  Serial.println("Booting; joining WiFi in the background");
}

void loop() {
  bool motion = digitalRead(4) == HIGH;
  if (motion) {
    digitalWrite(15, HIGH);
    digitalWrite(27, HIGH);
    if (WiFi.status() == WL_CONNECTED) {
      HTTPClient http;
      http.begin("http://cloud.tekko.sim/alert?site=shop&event=motion");
      int code = http.GET();
      http.end();
      Serial.print("Motion! ALERT sent, cloud reply ");
      Serial.println(code);
    } else {
      Serial.println("Motion! WiFi down - siren on, alert queued");
    }
    delay(1200);
    digitalWrite(15, LOW);
    digitalWrite(27, LOW);
  }
  delay(150);
}

আরো project · More projects