Skip to content
Capacitors

10uf 50v Capacitor

৳16

The 10uf 50v capacitor is probably the most-reached electrolytic on a hobby bench. Ten microfarads is the classic value for 555 timer circuits, regulator input and output filtering, decoupling beside power-hungry chips and gentle rail smoothing, and the 50V rating lets the same part survive 24V projects and adapter repair work.

  • 10uF at approx ±20% tolerance, 50V DC
  • Low ESR, suited to decoupling and filtering duty
  • Polarized: longer lead positive, stripe marks negative
  • Approx 5 x 11 mm can with 2 mm lead spacing
  • Rated -40°C to +105°C, 1000 hour load life

Students learn RC timing with it and Arduino builders park one next to every servo and radio module. To order, send us the part name on WhatsApp; cash on delivery covers all of Bangladesh.

এই part দিয়ে project — কেনার আগে ফ্রি চালিয়ে দেখো:Tekko Sim — free circuit & Arduino simulator

Capacitance: 10uF (10 microfarads)

Rated Voltage: 50V DC

Tolerance: approx ±20%

Type: Aluminum Electrolytic

Mounting: Radial Through-Hole

Polarity: Polarized — longer lead is positive, stripe marks negative

Lead Spacing: approx 2mm

Body Size: approx 5mm diameter x 11mm height (typical)

Temperature Range: -40°C to +105°C

Load Life: 1000 hours at rated temperature

ESR: low, suitable for decoupling and filtering duty

Typical Uses: 555 timer networks, regulator input/output filtering, chip decoupling, inter-stage coupling

CategoryCapacitors
Model no.CAP-10UF-50V
AvailabilityIn stock
In stock20 pcs
DeliveryCash on Delivery, nationwide Bangladesh

Customer reviews

No reviews yet — be the first.

Questions about the 10uf 50v Capacitor

Why is 10uF such a common capacitor value?
It is large enough to filter and time meaningfully yet small and cheap — so it appears in 555 circuits, at regulator inputs and outputs, beside noisy chips, and in almost every beginner project guide.
How do I use it with a 555 timer?
Place it from the timing node to ground with the positive lead at the node; together with the resistors it sets the charge curve, since frequency depends on R x C.
Can it handle a 24V circuit?
Yes — 24V is well inside the 50V rating, which is exactly why this version is popular for relay boards, LED drivers and adapter repair.
Where should it go on an Arduino or ESP32 board?
Across the supply rails close to the board or module: positive lead to 5V/3.3V rail, striped lead to GND, ideally beside servos, radios or displays that spike the rail.
What if I install it backwards?
Reverse bias heats the part and can vent or destroy it — always identify the stripe before powering up.
10uF electrolytic or 10uF ceramic — which one?
Ceramics are smaller and non-polarized, but real 10uF ceramics vary strongly with DC bias; for timing and bulk filtering at low cost the electrolytic remains the dependable choice.
How long does it last, and when do I replace it?
Many years at room temperature (1000 hours rated at full temperature); replace when a timer drifts, ripple appears on a rail, or the can shows bulge or dried electrolyte.
10uf 50v ক্যাপাসিটরের দাম কত?
সর্বশেষ দাম Tekko প্রোডাক্ট পেজে দেখুন — ওখানেই সর্বশেষ প্রাইস দেওয়া থাকে।
এই কমন ভ্যালুটা কোথায় পাবো?
Tekko অনলাইন স্টোরে স্টকে আছে; অর্ডার করলে সারা বাংলাদেশে হোম ডেলিভারি হয়।
টাইমার আর ফিল্টার সার্কিটে এটা কী কাজে লাগে?
555 টাইমারের ফ্রিকোয়েন্সি ঠিক করা, রেগুলেটরের ইনপুট-আউটপুট মসৃণ রাখা আর চিপের পাশে ডিকাপলিং — এই তিন কাজেই 10uF সবচেয়ে প্রথমে হাতে ওঠে।
ব্রেডবোর্ডে কিভাবে লাগাবো?
লম্বা লিড পাওয়ার রেলে (VCC), দাগের লিড GND রেলে বসান — সার্ভো বা রেডিও মডিউলের ঠিক পাশে দিলে রেলের ঝাঁকি প্রায় চলেই যায়।
নতুন শিক্ষার্থীরা এটা দিয়ে কী শিখতে পারবে?
RC টাইম কনস্ট্যান্ট আর ফিল্টারিং হাতে-কলমে শেখার জন্য 10uF সবচেয়ে সুবিধাজনক ভ্যালু — LED ফ্ল্যাশার বানিয়েই রেজিস্টর-ক্যাপাসিটরের সম্পর্ক পরিষ্কার বুঝে যাবেন।