Boat Safety Monitor Kit
লঞ্চ সেফটি মনিটর কিট
Two load cells watch the left and right deck load, two ultrasonic gates count passengers in and out, an MPU6050 feels tilt and a water sensor detects flooding - the Arduino boils every risk into one 0-100 score and sounds the buzzer early. Matches the Tekko Sim boat-safety-monitor project, part for part.
দুইটা load cell ডেকের বাম-ডান ওজন দেখে, দুইটা ultrasonic gate যাত্রী ওঠা-নামা গোনে, MPU6050 কাত টের পায়, water sensor পানি ঢোকা ধরে - Arduino সব বিপদ যোগ করে ০-১০০ স্কোর বানায়, বিপদের আগেই buzzer বাজে। Tekko Sim-এর boat-safety-monitor project-এর সাথে হুবহু মেলে।
What is in the kit
| 1 × Arduino UNO R3 | ৳910 |
| 1 × LCD 16x2 with I2C Module | ৳280 |
| 1 × 6DOF Accelerometer Gyroscope GY-521 MPU-6050 | ৳370 |
| 1 × water level sensor module | Contact for price |
| 1 × HC-SR04 Ultrasonic Distance Sensor | ৳140 |
| 1 × Buzzer 5V | ৳25 |
| 1 × LED Red | ৳2 |
| 1 × Resistor 220 Ω | ৳2 |
| 1 × Load Cell 100g to 1Kg | ৳280 |
| 1 × NEO-6M GPS Module | ৳540 |
| 1 × I2C Bi-directional Logic Level Converter | ৳220 |
| 1 × ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module | ৳175 |
| 2 × Breadboard (830 Tie-Point) | ৳320 |
| 2 × Breadboard Power Supply Module 3.3V 5V | ৳200 |
| 2 × Weighing Sensor 24 Bit Load Cell Amplifier HX711 | ৳260 |
| 1 × Jumper Wire Kit (M-M) | ৳90 |
| 1 × Jumper Wire Kit (F-M) | ৳90 |
Run it before you buy
The same circuit runs in your browser, free, with the code already written: Load Cell Arduino has the wiring, the code and a Run button. Press it, see it work, then order the parts.
কেনার আগে ফোনেই চালিয়ে দেখো — code আর wiring রেডি।
Not in the box
- A USB cable for the Arduino, if you do not have one (ask us when you order)
- A power bank or battery pack to run the build away from a laptop
- A waterproof box or mounting for trying it on a real boat
Good for
University final-year and course projects (the classic launch-safety project), science fairs. It is a learning prototype, not certified marine safety equipment.